![]() |
spdif, Win32 waveout extension/a52 You have created a great product! It's almost perfect, but spdif support could be better. VideoLAN has an alternative for "Win32 waveOut extension output" and spdif/a52. This is the only player I have found that actually works with my sound card (RealTek ALC889A). I promise to purchase the full version if you add this feature! :) |
Have you already tried to play with BSplayer audio settings? (CTRL+P -> Audio -> For AC3 decoding use.... ther you can select the default filter to use when decoding AC3 audio streams, and use the filter that can properly output the audio to your hardware, you can access that filter properties once the movie starts by right-clicking -> Options -> Filters -> Advanced - > select the used filter and set the correct outputs) If you use Intervideo AC3 you can also select your output settings in BSplayer preferences window (CTRL+P -> Audio -> InterVideo AC3) |
ALC 889A it's an onboard audio codec, not a sound card. Should work fine with BSPlayer if you have the propr filter installed (AC3Filter for example) |
When I select the Intervideo ac3-decoder the setting is not saved for some reason. Played around a lot with AC3Filter, but it says my soundcard is not supported. Is there an alternative? I Also tried to output the signal as PCM, but the result was not pretty. |
Can you post here a screenshot of AC3Filter error message ? Can you also please specify in here what mnotherboard do you have ? (as the sound codec is built in to the motherboard) |
1 Attachment(s) I have a Gigabyte ga-ep45-ds5 motherboard. Ac3filter says the following: Input format: DTS - 48000 User format: PCM16 3/2.1 (5.1) 0 Output format: PCM16 3/2.1 (5.1) 48000 Use SPDIF SPDIF status: Disabled (SPDIF output is not supported) SPDIF passthrough for: AC3 DTS Use AC3 encoder (encode stereo PCM) Do not check SPDIF sample rate Query for SPDIF output support Decoding chain: (DTS - 48000) -> Decoder -> (Linear PCM 3/2.1 (5.1) 48000) -> Processor -> (PCM16 3/2.1 (5.1) 48000) -> Dejitter -> (PCM16 3/2.1 (5.1) 48000) Filters info (in order of processing): Decoder: Stream format: DTS 3/2.1 (5.1) 48000Hz Bitstream type: 16bit big endian Frame size: free format Samples: 512 Bitrate: unknown SPDIF stream type: 0xb Frame interval: 2013 Actual bitrate: 1509kbps DTS speakers: 3/2.1 (5.1) sample rate: 48000Hz bitrate: 1536kbps stream: 16bit BE frame size: 2013 bytes nsamples: 512 amode: 9 No CRC Processor: (Linear PCM 3/2.1 (5.1) 48000) -> Input levels -> (Linear PCM 3/2.1 (5.1) 48000) -> Mixer -> (Linear PCM 3/2.1 (5.1) 48000) -> Bass redirection -> (Linear PCM 3/2.1 (5.1) 48000) -> AGC -> (Linear PCM 3/2.1 (5.1) 48000) -> Delay -> (Linear PCM 3/2.1 (5.1) 48000) -> Output levels -> (Linear PCM 3/2.1 (5.1) 48000) -> Linear->PCM converter -> (PCM16 3/2.1 (5.1) 48000) Dejitter: |
Anyone has a sloution for this? I have exactly the same problem! (BSPlayer 2.34, ac3filter 1.51) |
Ah, you have to uncheck "check output format support"". That did it for me! |
All times are GMT +1. The time now is 07:45 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Ad Management plugin by RedTyger