OK, at tis moment I will try to uninstall just ffdshow from inside K-lite and install the 64 bit version (just ffdshow).

This file had also crushed Bsplayer:

Format : AVI
Format/Info : Audio Video Interleave
File size : 349 MiB
Duration : 44mn 7s
Overall bit rate : 1 106 Kbps
Writing application : VirtualDubMod 1.5.10.2 (build 2540/release)
Writing library : VirtualDubMod build 2540/release

Video
ID : 0
Format : MPEG-4 Visual
Format profile : Advanced Simple@L5
Format settings, BVOP : Yes
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Muxing mode : Packed bitstream
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 44mn 7s
Bit rate : 968 Kbps
Width : 640 pixels
Height : 400 pixels
Display aspect ratio : 1.600
Frame rate : 25.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.151
Stream size : 305 MiB (88%)
Writing library : XviD 1.2.1 (UTC 2008-12-04)

Audio
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Mode extension : MS Stereo
Codec ID : 55
Codec ID/Hint : MP3
Duration : 44mn 7s
Bit rate mode : Constant
Bit rate : 128 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Stream size : 40.4 MiB (12%)
Alignment : Aligned on interleaves
Interleave, duration : 40 ms (1.00 video frame)
Interleave, preload duration : 504 ms



http://www.imageurlhost.com/images/6...sdvyhi1vu3.jpg
http://www.imageurlhost.com/images/d...qt65nk16nw.jpg
http://www.imageurlhost.com/images/o...5vbr4wuzdi.jpg
http://www.imageurlhost.com/images/j...vqu8azdl37.jpg
http://www.imageurlhost.com/images/l...fszj0fbbvo.jpg
http://www.imageurlhost.com/images/n...1a0xlx7l3b.jpg
http://www.imageurlhost.com/images/l...kxtooin7gn.jpg

Same ffdshow as decoder.
Just to test. Blacklist ffdshow or disable MPEG4 support in ffdshow video configuration. 7's MPEG4 decoder should take it's place as favorite decoder. See if problem still persist.

All these in yellow?
http://www.imageurlhost.com/images/y...94xj_thumb.jpg



Or this?
http://www.imageurlhost.com/images/o...kjt6_thumb.jpg


One of these to choose what i will put on blacklist or disable it?

Second image, XviD and DivX -> disable.

Ok, i disabled Xvid and DivX 4/5/6. Now i am waiting...

For ?
A file to crash ? Browse some files and play them :happyroll:

It wasn't helped :(. Why only i get this problem :(

Can you confirm that there is no longer ffdshow in the list of used filters ? Same screens as above ?

here it is:

http://www.imageurlhost.com/images/e...ru6q5ax8jo.jpg

No, I mean open such a file and post the filters used to decode the file. Like in the first screenshots with bsplayer's filter window.

Can i post filters from other file? I deleted those files.

As long as it's an MPEG4

This file has been crushed when i tried to turn off Bsplayer.
http://www.imageurlhost.com/images/s...d4v6m89e0k.jpg

Format : AVI
Format/Info : Audio Video Interleave
File size : 349 MiB
Duration : 44mn 9s
Overall bit rate : 1 104 Kbps
Writing application : VirtualDubMod 1.5.10.2 (build 2540/release)
Writing library : VirtualDubMod build 2540/release

Video
ID : 0
Format : MPEG-4 Visual
Format profile : Advanced Simple@L5
Format settings, BVOP : Yes
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Muxing mode : Packed bitstream
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 44mn 9s
Bit rate : 967 Kbps
Width : 640 pixels
Height : 416 pixels
Display aspect ratio : 3:2
Frame rate : 25.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.145
Stream size : 305 MiB (88%)
Writing library : XviD 1.2.1 (UTC 2008-12-04)

Audio
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Mode extension : MS Stereo
Codec ID : 55
Codec ID/Hint : MP3
Duration : 44mn 9s
Bit rate mode : Constant
Bit rate : 128 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Stream size : 40.4 MiB (12%)
Alignment : Aligned on interleaves
Interleave, duration : 40 ms (1.00 video frame)
Interleave, preload duration : 504 ms



http://www.imageurlhost.com/images/j...vg2fqj98zo.jpg
http://www.imageurlhost.com/images/h...b9nbtnch97.jpg
http://www.imageurlhost.com/images/r...onq2kl5jaq.jpg
http://www.imageurlhost.com/images/z...5rduj4cjrj.jpg
http://www.imageurlhost.com/images/e...h5v6vlmo2g.jpg
http://www.imageurlhost.com/images/6...od9gk7nbv0.jpg
http://www.imageurlhost.com/images/q...rlelic4uax.jpg

Something is really wrong, as ffdshow still shows up. It's not disabled. Last measure, uninstall ffdshow.

How to uninstall when it is in packet K-lite codec pack?

If there is an uninstall shortcut in start menu under K-Lite, start it and see if you can uninstall just ffdshow.

No, i can't. I can only uninstall complete.

Do you recall if at install you have the option to uncheck the filters you don't want to install ? If so, uninstall K-lite and reinstall it but uncheck ffdshow.

LE: by any chance, did you install ffdshow from K-lite AND also through BSPlayer's codec manager ?

1. I think i had it. I will uninstall/install again.

2. No, i did not.

I do not know did i good all ok. Do i need to uncheck everywhere where is ffdshow?


http://www.imageurlhost.com/images/9...xsj4_thumb.jpg

There is still GENERIC Mpeg4 checked. UNcheck it too.

I unchecked that too.

I run file which was crushed before.

http://www.imageurlhost.com/images/b...lnvpouadib.jpg
http://www.imageurlhost.com/images/9...slvfw2rl3a.jpg
http://www.imageurlhost.com/images/f...1ka0c285ut.jpg
http://www.imageurlhost.com/images/0...9jn3mlcdq2.jpg
http://www.imageurlhost.com/images/v...f3ceooac23.jpg


Is is ok now? Soon I will see is everything ok or not


btw i installed again 32bit ver.

As you can see, this time the video decoder it's MPEG4s DMO, not ffdshow video decoder anymore. Should work fine...I hope.

Format : Matroska
File size : 501 MiB
Duration : 2h 29mn
Overall bit rate : 467 Kbps
Encoded date : UTC 2008-12-02 13:15:22
Writing application : mkvmerge v2.3.0 ('Freak U') built on Sep 8 2008 18:32:16
Writing library : libebml v0.7.7 + libmatroska v0.8.1

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L3.0
Format settings, CABAC : Yes
Format settings, ReFrames : 8 frames
Format settings, GOP : M=1, N=2
Muxing mode : Container profile=Unknown@3.0
Codec ID : V_MPEG4/ISO/AVC
Duration : 2h 29mn
Nominal bit rate : 426 Kbps
Width : 720 pixels
Height : 304 pixels
Display aspect ratio : 2.35:1
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.081
Writing library : x264 core 65 r1028M 83baa7f
Encoding settings : cabac=1 / ref=8 / deblock=1:-2:-1 / analyse=0x3:0x113 / me=umh / subme=6 / psy_rd=1.0:0.0 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / chroma_qp_offset=-2 / threads=3 / nr=0 / decimate=1 / mbaff=0 / bframes=16 / b_pyramid=0 / b_adapt=1 / b_bias=0 / direct=3 / wpredb=1 / keyint=250 / keyint_min=25 / scenecut=40(pre) / rc=2pass / bitrate=426 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.00
Language : English

Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 4
Format profile : LC
Format settings, SBR : Yes
Format settings, PS : No
Codec ID : A_AAC
Duration : 2h 29mn
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz


http://www.imageurlhost.com/images/d...ii7qxn176b.jpg
http://www.imageurlhost.com/images/7...0llojgjf5t.jpg
http://www.imageurlhost.com/images/4...z0mgfyntzu.jpg
http://www.imageurlhost.com/images/8...f35p904r7x.jpg

:(((

So I understand that this file crashed BSPlayer ?
It's an MKV this time. Unfortunately, it seems that you don't have CoreAVC installed (for MPEG4-AVC - x264 decoding) so ffdshow took it's place.

Yes, it crached again.

What can i do this time?

1. AVI files, do they crash or not ? Is this problem fixed or not ?
2. For x264 files, disable ffdshow and install another filter, such as CoreAVC.

1. How i see for now is all ok.
2. Do i need again to reinstall codec pack? Can you look at the picture above where i post what i have to uncheck and to tell me what all i have to uncheck for x264

No need to uninstall. Just open ffdshow configuration window, uncheck x264 and H264 support, install CoreAVC and should be fixed.

ffdshow wasn't the problem. BSplayer has continue to crash. I have problem with wmv too.



btw How do I set subtitles to be always on the black line? It is always on the picture above the black line.

Subtile preferences -> enable draw of subtitles under video

Do you mean:

Enable drawing subtitles under image with EVR renderer
?

Yes, that's it.

I was already checked. When i run a other movie it is again on the picture. It wont to memorize where i put a subtitle.


________________________
black line
________________________


>>>>>> Movie <<<<<<<


subtitle (it is always here)
________________________
Black line (i want sub always here)
________________________



Color controls doesn't work too :(. Moving slider for all 4 options but nothing happen.

BSPlayer can't menorise it's settings if you don't have UAC disabled or program files folder it's set as "read only".

If you can move the subtitle to the black bar below the picture, but this setting is lost the next time you use BS.Player, I cannot but agree with adicoto (in pointing to UAC as the probable cause of this problem).

However, if changed settings are retained after a restart of BS.Player and/or you simply cannot move subtitles to the black bar, there may be other causes/cures.
In that connection perhaps see this post (click here).
:wink:

I do not believe what are you talking about... Man, do you see when we start about my problem - BSplayer CRASH if you forget? And now you AGAIN talking about "read only". What is wrong with you?
If you do not have solution for primary problem, please i do not need unnecessary suggestions. Thank you for your time.



@BSPeter

video rendering > Internal render DirectDraw surface

That is set in my config. I put on EVR but a picture is ugly.

Any way i do not care for this too much. I have problem which i want to solve it. I do not planning to use BSplayer any more if i need to use it this program which crash down every 4,5 times.

My friend have the same problem. He has Win 7 x64 too.

Sorry for trying to pinpoint your problems, because I don't have them, using same OS as you are. So, IMHO this is not a BSPlayer problem as on my system is running smooth with no crashes. So, as I can't track down your problem on my system, I am trying to find solutions by asking you. If that bothers you, sorry for wasting your time.
What's wrong with me ? Probably the fact that, as a simple user like yourself, I am trying to help others. So, no other unnecessary suggestions from me.

Now i see the reason why you were the only one who tried to help it. Which means if we're not solved nobody from the team will not even try to solve.


I know that I acted arrogantly but from your message seemed to be coming back again at the beginning of my problem. Well it turned out that not you follow the course of events.