Audio on TV

[Tizio]

Originally Posted by adicoto

Here it's working like this:
1. MUTE line-in from your audio card cotrol panel (or windows')
2. In capture settings select :roll: Line-in as the source for audio

Now, you can control audio level for TV signal from BSPlayer's controls, and, :roll: you also have the sound if you record from TV-tuner. Strange indeed, but it's working. And no echo :roll: They used to say, "unknown are the ways of the Windows", but I may add this for BSPlayer too.

Yes, it's the way I use BSplayer TV Tuner..
There is no echo because BSplayer processes the audio independently from LinIn line (even though it takes it from there, and the audio is a bit delayed in respect of the lineIn one. So if you enable LineIn volume, you will hear BSplayer audio (delayed)) and LineIn audio (not-delayed) = echo.
If you switch on your TV and BSplayer on the same channell, you'll have echo again, but if you mute BSplayer and un-mute LineIn you'll see that the signal from TV and LineIn are in syncro = no echo. But this way you'll not be able to control audio volume from BSplayer since it's mute and it doesn't directly control the LineIn one :?