Audio on TV

[adicoto]

Here it's working like this:
1. MUTE line-in from your audio card cotrol panel (or windows')
2. In capture settings select :roll: Line-in as the source for audio

Now, you can control audio level for TV signal from BSPlayer's controls, and, :roll: you also have the sound if you record from TV-tuner. Strange indeed, but it's working. And no echo :roll: They used to say, "unknown are the ways of the Windows", but I may add this for BSPlayer too.

[Tizio]

Originally Posted by adicoto

Here it's working like this:
1. MUTE line-in from your audio card cotrol panel (or windows')
2. In capture settings select :roll: Line-in as the source for audio

Now, you can control audio level for TV signal from BSPlayer's controls, and, :roll: you also have the sound if you record from TV-tuner. Strange indeed, but it's working. And no echo :roll: They used to say, "unknown are the ways of the Windows", but I may add this for BSPlayer too.

Yes, it's the way I use BSplayer TV Tuner..
There is no echo because BSplayer processes the audio independently from LinIn line (even though it takes it from there, and the audio is a bit delayed in respect of the lineIn one. So if you enable LineIn volume, you will hear BSplayer audio (delayed)) and LineIn audio (not-delayed) = echo.
If you switch on your TV and BSplayer on the same channell, you'll have echo again, but if you mute BSplayer and un-mute LineIn you'll see that the signal from TV and LineIn are in syncro = no echo. But this way you'll not be able to control audio volume from BSplayer since it's mute and it doesn't directly control the LineIn one :?

[adicoto]

I think BSPlayer use the direct link between the video stream and the audio one, as given by tuner's drivers. Once it captures the video signal from the card, the audio signal is internal linked allready. At least that's how my tuner works.
It would be interesting to see if BSPlayer can use PCI signal from TV cards !

[Tizio]

It would be very nice